Posted to Products on 2nd Mar 2023, 12:20 by Mark Simms Share:

OKW’s new CONNECT S enclosures for handheld wired electronics

OKW has added a new slimline S size to its CONNECT range of handheld plastic enclosures for wired electronics. The new enclosures are 12mm slimmer than the existing size M.

The company says the versatile CONNECT is ideal for data systems engineering, networks, building services technology, safety engineering, IoT/ IIoT sensors, medical devices, measurement and control.

CONNECT enclosures comprise two sections – one flat and recessed for a membrane keypad, the other curved and tactile. Rounded corners add further ergonomic comfort.

CONNECT’s two shells snap together; there are no fixings screws – reducing assembly time and giving designers a choice of two ‘fronts’. Apertures at both ends can be fitted with either a cable gland or end panel.

The enclosures offer plenty of space for compact displays, LEDs and USB connectors. Inside, the flat section has pillars for fitting PCBs and other components.

New CONNECT S is 42 mm wide, 22 mm high and available in three lengths: 60, 90 and 120 mm. (Existing size M is 54 x 22 x 76/116/156 mm.) All the housings are moulded from UV-stable ASA+PC-FR (UL 94 V-0) in either off-white (RAL 9002) or black (RAL 9005). Accessories include rail holding clamps, cable gland kits, end panels, wall holders and PCB mounting screws.

OKW can supply CONNECT enclosures fully customised. Services include machining, lacquering, printing, laser marking, decor foils, EMC shielding, and installation/assembly of accessories.

OKW Enclosures

15 Brunel Way
Segensworth East
FAREHAM
PO15 5TX
UNITED KINGDOM

01489 583858

sales@okw.co.uk

www.okw.co.uk

More products
2 weeks ago
Developing a bespoke telematics system
Intertronics has supported Bulk Tainer Telematics with material and dispensing equipment for a specialist GPS device.
2 weeks ago
LOCTITE looks forward to developing strong bonds at Engineering Solutions Live
With fastening and joining a key focus at Engineering Solutions Live, Henkel is showcasing the latest advances in high performance engineering adhesives from LOCTITE on Stand 35 on 23 March at the British Motor Museum in Gaydon.
2 weeks ago
Manufacturing expansion in India will supply the US door spring market
Together with an increasing demand for overhead doors from the industrial building sector, the American door spring market is about four times larger than in Europe, an opportunity where Alcomex, part of the Lesjöfors Group, is making the most.
3 weeks ago
Southco hosts UK event to launch brand new handbook
Southco, leading global designer and manufacturer of access hardware solutions, hosted its second ‘Editor’s Day’ event at its European headquarters in Worcester, UK. The focus of the day was to exhibit Southco’s recently launched paper edition of its renowned Handbook.
3 weeks ago
Intertronics appoints head of learning and development
To help grow understanding of the selection and processing of adhesives for UK manufacturing, Intertronics has appointed Kevin Brownsill as head of technical: learning and development.
3 weeks ago
Emka compression latches aid wind power from Nordex
When Nordex Group needed a new compression latch to secure vital access points on wind turbines, to withstand forces of up to 331 Newtons, it turned to Emka. These locks are fitted to special floor plates which are required to prevent serious accidents.
1 month ago
Southco launches new handbook
Southco has published its new handbook (HB 72), a comprehensive guide to every product the manufacturer has to offer. This marks the first time Southco has released a handbook in print since 2015.
1 month ago
Sustainability matters for parts and components supply
The market of tomorrow will demand environmental and social commitments from parts and components suppliers, and the companies that are already taking sustainability seriously can demonstrate what can be achieved, as Edward Arnott, Sustainability Task Force lead at WDS explains.
1 month ago
Flexible structural adhesive prevents glass shattering at Heathrow Terminal 5
Glass is one of the most striking features of Terminal 5 at Heathrow Airport, but also a potential vulnerability. In the event of a terror attack shattering the glass, a high percentage of injuries in an explosion or bomb blast are caused by flying glass fragments rather than any incendiary device itself. Ensuring that can’t happen is a bonding solution from Advanced Adhesives.
1 month ago
Join the fastener and fixing industry’s global gathering
Fastener Fair Global is the meeting place for leading international organisations in the fastener and fixing sector and an opportunity for exchanging competencies and views on current technological developments.

Login / Sign up