Wave spring or coil spring?

Simon Ward is Technical Manager at  Uckfield-based fastener specialists TFC. Here he offers a machine designers a comparison between wave springs and round wire coil springs 

TFC supplies Crest-to-Crest™ wave springs. Wave springs can offer similar loads and deflection to traditional coil springs, but at around half the height. They can reduce axial space by up to 50 per cent, leading to an overall decrease in assembly size, weight and cost. For design engineers looking to utilise these benefits and discover if a wave spring can replace a coil spring in an application there are some guidelines worth bearing in mind.

Key differences

Wave springs and coil springs are both types of compression spring, primarily used to provide an axial force in either a static or dynamic application. However, there are differences. Coil springs are typically made of round wire, whereas wave springs are made from flat wire. This provides an opportunity to significantly reduce working heights within any assembly. Space-saving is key in medical applications, such as handheld instruments like dental tools and insulin pens, which must be lightweight and compact.

A wave spring, true to its name, utilises a sinusoidal waveform to generate the required axial force. The wave springs we supply have multiple turns to build up the free height of the spring to achieve the required deflection characteristics. 

Another difference is the way that wave and coil springs store and release energy. A coil spring has a pitch angle and is torsional so it can twist as it compresses, meaning not all force is necessarily aligned with the axis. On the other hand, wave springs rely on bending — as load is applied, the waves begin to flatten, providing an upward force, allowing for complete axial load transmission.

Swapping from a coil spring to a wave spring

For design engineers currently using coil springs, switching to a wave spring needs careful consideration. There is an extensive range of standard sizes that may suit, but in 70-80 per cent of cases we will develop a bespoke design to maximise the benefits. Before designing any wave spring, it helps for TFC to understand the space constraints and the spring performance characteristics. The final design is then achieved by modifying the number of waves and turns, adjusting material cross section and wave heights. Choice of material also affects the design and will normally be dictated by the operating temperature and environment where the spring must function.

If a wave spring does not suit the application, then we have several other options including single turn and nested springs. To identify the correct wave spring for your application, the best thing to do is work with a specialist. An experienced TFC engineer can help you find the ideal wave spring, to help you achieve design breakthroughs. For more information click here.

 

TFC Ltd

Hale House
Ghyll Industrial Estate
Heathfield
TN21 8AW
UNITED KINGDOM

+44 (0)1435 866011

sales@tfc.eu.com

www.tfc.eu.com

More from TFC Ltd
More technical
5 days ago
Quarter turn fastener that still turns heads
Automotive manufacturers are gradually making the transition from solely manufacturing vehicles to taking on more responsibility for the performance of a vehicle over its life cycle. As a result, OEMs are increasingly looking for ways to lower installation costs, and facilitate quick repeatable access to critical vehicle components in order to enable faster service calls
1 week ago
Norbar offers engineering apprenticeships
Banbury-based manufacturer Norbar Torque Tools is hosting a series of virtual careers evenings in February, aimed at young people looking to start a career in engineering and manufacturing
1 week ago
Quarter turn fastener selector tool
Oddie Fasteners offers designers a useful tool to optimise the selection of quarter turn fasteners for machine access panels
1 week ago
Managing a blooming nuisance in bonding
Cyanoacrylates (CAs) are easy to use, single-part adhesives. They cure quickly at room temperature, offer good throughput and are suitable for bonding a range of substrates. In this article, Peter Swanson, Managing Director of adhesives specialist Intertronics, shares his experience and offers tips on how to manage and prevent blooming in your CA process
1 week ago
Coloured latches to match machine panels
If you’ve been hunting for latches to match the panels on a machine then this might be the answer
2 weeks ago
Brexit Update 2: Implications for machine builders
The UK and EU have reached an agreement over their future trading relationship, so there is finally some clarity for machine builders
2 weeks ago
Brexit Update 1: Designated Standards for Machinery
Dated 1st January 2021, the Government has published a consolidated list of Standards for machinery. It supports the Supply of Machinery (Safety) Regulations 2008 (S.I 2008/1597)
2 weeks ago
Welding vs Fastening: the winner is….
For some time welding was seen as the only way to assure the integrity of joints in particularly demanding load-bearing or high-vibration structures. Not so today.
4 weeks ago
TR Fastenings flies higher with AS9120 Certification
Fastener specialist TR Fastenings has achieved AS9120 Certification, recognising the company’s commitment to aerospace quality and conformance
1 month ago
Bonding locators onto signs: video guide
Eurobond Adhesives has produced a video which demonstrates what it says are the best techniques to bond different types of locators onto the back of signs